back to belt selection     
Flat-Flex® XT
 

The use of one- and three-space splice clips are recommended for installing Flat-Flex® XT belts. Consult the chart on this page for the recommended number and combinations of one- and three-space clips to use for the number of spaces across the width of various Flat-Flex® XT belts. These numbers may be different than for classic Flat-Flex.

24 x .072 XT # XT # of Clips 42 x .062 XT # XT # of Clips
Belt Width Spaces* 3 space + 1 space Belt Width Spaces* 3 space + 1 space
11.94 to 14.50 5 2 + 1 10.06 to 12.88 4 2 0
14.56 to 17.00 6 3 0 12.94 to 15.75 5 2 + 1
17.19 to 19.75 7 3 + 1 15.81 to 18.50 6 3 0
19.81 to 22.25 8 4 0 18.56 to 21.38 7 3 + 1
22.44 to 25.00 9 4 + 1 21.44 to 24.25 8 4 0
25.05 to 27.50 10 5 0 24.31 to 27.13 9 4 + 1
27.69 to 30.25 11 5 + 1 27.19 to 30.00 10 5 0
30.31 to 32.75 12 6 0 30.06 to 32.88 11 5 + 1
32.94 to 35.50 13 6 + 1 32.94 to 35.75 12 6 0
35.56 to 38.00 14 7 0 35.81 to 38.63 13 6 + 1
38.19 to 40.75 15 7 + 1 38.69 to 40.50 14 7 0
40.81 to 43.48 16 8 0 40.56 to 42.00 15 7 + 1

*Also the required number of sprockets needed. Use one sprocket for every XT (narrow) space.

24 x .072 Flat-Flex® XT belts are available in widths up to 72". For additional information on wider belts contact Technical Services at (800) 922-2637 or (603) 644-2500.



Note: If you prefer to use single space clips exclusively, you use the same number of clips as XT spaces - placing the clips only in the XT spaces.