For power transmission and linear positioning, Jason Industrial’s polyurethane timing belts are designed for strength, ease of use and minimum maintenance. Polyurethane timing belts are available in all popular standard and metric pitches. We stock 300mm wide sleeves and can provide any required width from stock. Kevlar tensile cord can be substituted for steel on special orders.
Open End Belts
Ideal for linear drive and indexing applications, Jason’s Urethane open end belts are available in a variety of sizes, pitches and colors to meet all specifications. Belt styles include steel or kevlar reinforcement, as well as high load (HP) and high flexibility (HPF). Belts can be spliced to specified lengths.
Special Open End Belting
- Nylon Fabric on Backside,
- Low friction for transport
- PAZ) Nylon fabric tooth side for
- low friction and noise reduction.
Manufactured in urethane with continuous helically wound steel cable cords, Jason’s Uniflex belts are ideal for situations where high stress and load demands exceed the performance capacity of spliced belts or where the “tooling cost” of long length or non-standard endless belts are prohibitive. Truly endless at any length, Uniflex timing belts are suitable for all power transmission, high speed and severe conveying applications.
Uniflex Special Constructions
- High flex steel cord
- Nylon fabric on the teeth (PAZ)
- Special back matching
Special backings available in:
PU 85 ShA, LINATEX 40 ShA, Neoprene rubber 70 ShA, Yellow PU 60 ShaA, Grey PU 60 ShA and PVC
Jason Urethane VAR round and V-belting is the proven solution for all types of conveying problems. They are made of a polymer compound that provides high strength, oil and chemical resistance and most are FDA/USDA approved. VAR is available in a range of Shore hardnesses and coefficients of friction to meet every application requirement, as well as many standard diameters and sizes. In addition to the standard round and V sizes, VAR belting is available in ridgetop profiles for minimum contact applications and also in twin sections. Super Grip rough top backing is also available for application requiring additional product grip.
Jason can also make special profiles for large volume applications, contact us with your requirements. VAR belting is available in economical 100 foot rolls that can be stocked in your plant, ready to cut and splice to length in minutes. Jason belting is packaged in convenient clear center feeding rolls. Now, you can see how much belting remains on the roll at all times, eliminating the guesswork of estimating how much is left in a box.
Endless Belts Made Easy
Jason VAR belting can be easily field spliced to minimize down time for belt replacement. This is essential as many machine designs do not allow for disassembly to replace belts. It also assures correct belt fit every time. Replacing a VAR belt doesn’t require dismantling the equipment, reducing both downtime and maintenance costs. No expensive equipment or training is required. Maintenance personnel can fit new belts in a matter of minutes with our simple portable splicing kit.
It is as simple as determining the correct belt length, feeding the belt into the belt path and pulleys and then splicing the ends with our portable splicing tools.
VAR belting is available from stock with nine regional warehouses throughout the US and Canada. Jason is committed to providing the belts you need when and where you need them at a competitive price.
- Quick simple installation
- Reduced down-time, fast splicing
- 16 round and 6 V profiles
- Ridgetop and Twin V profiles
- 5 durometers
- Abrasion resistant for long life
- Non marking
- Oil and chemical resistant
- Flexible and easily cleaned
- USDA/FDA accepted*
- High load capacity & strength
- Wide operating temperature range
*Except RG, RGR, and RR.