Intralox Series 800
Thick sections for durability. Surfaces are designed for easy cleaning. USDA accepted for direct contact with raw meat or poultry. Snap-in rods and fully flush edges.
Perforated Flat Top
Thick sections for durability. Surfaces are designed for easy cleaning. USDA accepted for direct contact with raw meat or poultry. 5/32” (4 mm) round hole has 20% open area; 11/32” (8.7 mm) round hole has 14% open area; slotted hole pattern has 18% open area. Open
Hinge Flat Top
Cam-link designed hinges allow the belt to open up more around the sprocket for easier access to hinge area for cleaning. Sculpted, radiused underside and large corner rounds prevent debris build up, making cleaning easier and faster. Can splice into Series 800 Flat Top and use accessories and sprockets.
Smooth upper surface with fully flush edges. Belt has 27% open area with large slots for improved drainage and cleanability. Hole design eliminates water collecting on the belt surface and being carried throughout the processing line. Flights and sideguards available.
Nub pattern creates lifting effect that reduces surface contact between belt and product; eliminates the tendency of product to suction to the belt surface. Promotes quicker, easier product release.
Surface cones hold product in place. Provides gripping capability of food-grade rubber or PVC belting, with positive drive and tracking of modular plastic conveyor belts.
Thick sections for durability. Surfaces designed for easy cleaning. USDA accepted for direct contact with raw meat or poultry. Mini rib pattern accommodates gradual inclines and declines.
Flush grid surface offers 27% open area. Nub pattern creates a lifting effect that reduces surface contact between belt and product; eliminates the tendency of product to suction to the belt surface. Promotes quicker, easier product release.
Improves box and package conveyance in accumulation and low back pressure applications. Acetal rollers run on stainless steel roller axle pins for durability and wear resistance.
Smaller perforations eliminate excessive product loss associated with perforated belting and minimizes product from clogging the belt holes. May be used with all other Series 800 accessories (flights, sideguards, etc). Belt is designed to facilitate fast, efficient clean up and easy sanitation.
Flat Top Detectable
Developed for applications in the food processing industry where product contamination is a concern. Designed to be used upline from metal or x-ray detectors. It is specially formulated to enhance impact resistance. Effective in applications involving temperatures as low as 0 F (-18 C).
Molded and Split Sprockets
Molded sprockets are available in standard and EZ Clean designs. Split sprockets are available in both single plate and triple plate (Abrasion Resistant) configurations, in some pitch diameters.
SPROCKETS NOM. PITCH DIAM .
6T EZ Clean 102 mm (4.0″)
8T 132 mm (5.2″)
8T EZ Clean 132 mm (5.2″)
10T 165 mm (6.5″)
10T EZ Clean 165 mm (6.5″)
12T 196 mm (7.7″)
12T EZ Clean 196 mm (7.7″)
16T 262 mm (10.3″)
16T EZ Clean 262 mm (10.3″)
Flush Grid Round Top Flights
Flights have a 0.625” (16 mm) diameter on the tip of the flighted rows to reduce product damage and increase belt beam stiffness. Flights are available in custom widths up to 44” (1117 mm). Flush Grid Round Top Flights can be used with the following Series 800 belts: Flush Grid, Flat Top, Perforated Flat Top Round Hole belts, Mini Rib, Nub Top, Cone Top, Mesh Top and Open Hinge Flat Top.
Sideguards are used to assure product containment and are available in 51 mm (2”), 76 mm (3”) and 102 mm (4”) heights. Made in the standard overlapping design, they are an integral part of the belt and are fastened by the hinge rods.
Bucket and Scoop Flights
Bucket Flights are available in 57 mm (2.25”), 76 mm (3”), 102 mm (4”), and 152 mm (6”) sizes. Scoop Flights are available in 76 mm (3”), 102 mm (4”) and 152 mm (6”) heights. Ideal for conveying small products up an incline. Approved for FDA governed applications.
Straight, No-Cling, and Impact Resistant Flights
Streamline Flights are available in 25 mm (1”), 51 mm (2”), 76 mm (3”), 102 mm (4”) and 152 mm (6”) heights, and can be cut to any height. No-Cling Flights are available in 102 mm (4”). Impact Resistant Flights are available in heights ranging from 13 mm (0.5”) to 102 mm (4”), with 25 mm (1”) and 51 mm (2”) as standard sizes.
Nub Top Flight
The Nub Top Flight is available in a 4” (102 mm) height and was developed to accompany the Series 800 Nub TopTM belt. Both are designed to address a major problem facing companies in food processing industries – product sticking to the surface of conveyor belts.