The Proven Solution for Straight, Radius and Incline Applications
KVP Falcon’s All-In-One plastic belt is the first proven thermoplastic belt capable of combining straight, horizontal and vertical radii sections into one smooth, continuous operating conveyor. The belt’s highly versatile design is the perfect solution for straight, radius and incline applications. What’s more, the availability of flights, sideplates, rollers and high friction inserts provides even greater customization. All-In-One Series plastic belts are ideal replacements for metal, flat wire and traditional plastic belting. The belt’s overlapping surface provides continuous product support and vibration free belt movement, even when taking corners. 1″, 1-1/2″ and 2″ pitch designs are offered with up to 80% open area for air and fluid flow. The belts also meet both FDA and USDA requirements for food contact and cleanability.
The use of rollers in the All-In-One belts allow for low pressure accumulation, greatly increasing efficiency and versatility in soft package and case handling applications.
With KVP Falcon’s new Pop-Up/Retractable design you can incline or decline when and where desired. They provide the advantages of reliable product inclining and declining with the opportunity for accumulation, as well as side-on and side-off transfers all on the “same” conveyor.
The curved top All-In-One belt eliminates the chordal gap at the transfer point, allowing transfer plates to be in continuous contact with the belt, facilitating smooth, small product transfers.
ENHANCED HOLD DOWN TABS FOR 1″ PITCH ALL-IN-ONE SERIES
KVP Falcon’s popular 1″ pitch All-In-One IS61000 Series is now available with enhanced hold down tabs (HDT’s) that are simila r in strength to our 1 1/2″ and 2″ pitch All-In-One belts. The enhanced design provides increased durablity and wear life comparable to our larger pitch belts. The belt edge has also been modified to reduce the potential for snagging and chatter against the edge guides. The new HDT design is available on IS61000 Series belts in white acetal (WAC). Other compounds are available on a mold-to-order basis.
KVP Falcon offers straight, curved and ribbed flights for inclining, declining or separating product. Flight heights range from 1/4″ to 4″ and are available for most belt styles. Ask your KVP Falcon representative for flight availability for specific All-In-One belts and applications.
Sideplates provide product containment and reduce product damage due to catching, scratching or marring. KVP Falcon’s All-In-One belts are offered with sideplates ranging in height from 1″ to 4″. Ask your Belt Power representative for side plate availability for specific All-In-One belts and applications.
HIGH FRICTION INSERTS
High friction modules allow product to be gently inclined or declined through curved or straight conveyor sections without flights.
KVP Falcon sprocket designs provide for excellent drive capability and distribution of tension across the entire belt width. Various sizes and materials are available to match load, power and speed requirements.