OmegaFlex Stainless Tubular& Braided Braid

OmegaFlex Stainless Tubular & Braided

Tubular & Braided

Tubular Braid for Series 300
Braided Braid for Series 300

Materials available include 304, 321 and 316 stainless steel
Wide range of constructions including 24, 36, 48, 72, 96 and 128 carrier designs
Clean and oil-free
Soft texture allows for easy trimming and quicker hose assembly fabrication
Long mill lengths for less waste
Engineered for optimal hose coverage
Manufactured on OmegaFlex hose mandrels to ensure proper braid angle
Custom braiding to customer specifications is available in 304, 321 and 316L stainless steel, bronze, monel, exotic alloys and synthetic materials

Tubular Braid for Series 300 Hose — Stainless Steel T304, T321 and T316
Nominal Hose Size (in.)	Braid Type^{^a}	Braid Construction	Braid I.D. (in.)	Braid Coverage (%)	Max. Working Pressure at 70F (PSIG)^{^b}	Weight Per Foot (lb.)	Typical Mill Length (ft.)^{^c}
1/4		24 x 6 x .012	0.46	90	2375	0.065	30–100
3/8		24 x 8 x .012	0.61	94	1650	0.098	30–100
1/2		24 x 8 x. 012	0.75	86	1100	0.101	30–100
3/4		36 x 8 x .012	1.04	90	800	0.143	30–100
1		36 x 8 x .016	1.34	88	750	0.268	30–100
1-1/4		48 x 8 x .016	1.65	97	725	0.375	30–60
1-1/2		48 x 8 x .016	1.90	96	565	0.377	30–60
2		48 x 8 x .020	2.50	96	500	0.680	30–60
2-1/2		72 x 8 x .020	3.33	90	400	0.710	30–60
3		72 x 8 x .020	3.89	86	288	0.760	30–60
3-1/2		72 x 10 x .020	4.36	86	285	1.150	30–50
4		72 x 10 x .020	4.83	84	250	1.130	30–50
5	A	96 x 8 x .025 96 x 12 x .020	5.94 5.94	87 93	200 200	1.320 1.230	30–100 40–78
6	A	96 x 8 x .025 96 x 1 2 x .020	6.95 6.95	82 87	175 175	1.470 1.450	50–100 40–66
a. Standard braid constructions are shown without a type designation. The “A” designation is an optional braid design for alternate pressure capability. b. Maximum working pressure shown is calculated for OmegaFlex annular hose and corresponding single layer braid. See Series 300 annular hose specifications for additional information. Performance may be reduced if braid is not used on OmegaFlex hose. c. Consult factory for longer lengths.

Braided Braid for Series 300 Hose — Stainless Steel T304
Nominal Hose Size (in.)	Braid Type^{^a}	Braid Construction	Braid I.D. (in.)	Braid Coverage (%)	Max. Working Pressure at 70F (PSIG)^{^b}	Weight Per Foot (lb.)	Typical Mill Length (ft.)^{^c}
5	A	96 x (13 x .025) 128 x (21 x .016)	5.94 5.94	84 84	245 245	2.31 2.29	50–100 30–77
6	A	96 x (13 x .025) 128 x (21 x .016)	6.95 6.95	96 96	275 250	2.75 2.70	50–100 30–65
8	A	96 x (17 x .025) 128 x (25 x .016)	9.08 9.08	87 99	212 175	3.41 3.34	50–100 30–65
10	A	96 x (29 x .025) 128 x (25 x .020)	11.10 11.10	93 97	175 185	3.94 3.90	50–100 30–60
12	A	96 x (29 x .024) 128 x (25 x .024)	13.22 13.22	91 96	160 170	5.95 5.90	50–100 30–60
14		96 x (29 x .025)	16.40	74	110	6.54	10–30
a. Standard braid constructions are shown without a type designation. The “A” designation is an optional braid design for alternate pressure capability. b. Maximum working pressure shown is calculated for OmegaFlex annular hose and corresponding single layer braid. Performance may be reduced if braid is not used on OmegaFlex hose. c. Consult factory for longer lengths.