OmegaFlex Stainless High Pressure Hose

---

Series 800 Series 800 High Pressure Hose Braid Specifying Part Numbers for Series 800 Products Available in 321 stainless steel hose with 304 stainless steel braid — other materials on request. Pressure capability includes full vacuum to pressures shown below Temperature ratings from cryogenic to 1500F Consult Temperature Correction Table on page 28 for concurrent high temperature/high pressure applications Meets or exceeds ISO 10380e Sold only as braided hose Series 800 — Annular, Stainless Steel, High Pressure Hose and Braid  Nominal Hose Size (in.)  Braid Layers  Nominal Outside Diameter Minimum Centerline Bend Radius (in.) Pressure Ratings at 70F (PSIG)a,b,c, Braid Sleeve Crimp O.D.d (in.)  Weight Per Foot (ft.) Static Dynamic Max. Working Max. Test Nominal Burst 1/4e 1 2 0.51 0.56 2.25 3 4.5 6 2500 3250 3750 4875 10000 13000 0.58 0.59 0.19 0.30 3/8 1 2 0.67 0.73 3 4 6 8 2625 3250 3938 4875 10500 13000 0.73 0.78 0.31 0.51 1/2 1 2 0.83 0.89 4.5 6 7.5 10 2000 3200 3000 4800 8000 12800 0.90 0.93 0.39 0.63 3/4 1 2 1.16 1.26 6 8 9 12 1525 2625 2288 3938 6100 10500 1.33 1.36 0.59 0.96 1 1 2 1.43 1.54 6.75 9 10.5 14 1375 2050 2063 3075 5500 8200 1.59 1.66 0.73 1.10 1-1/4 1 2 1.87 1.98 4.5 6 13.5 18 1125 1800 1688 2700 4500 7200 1.93 2.00 1.32 2.02 1-1/2 1 2 2.19 2.25 5.25 7 16.5 22 1025 1750 1538 2625 4100 7000 2.25 2.32 1.56 2.55 2 1 2 2.65 2.78 6.75 9 18 24 850 1325 1275 1988 3400 5300 2.71 2.79 1.93 3.14 2-1/2 1 2 3.42 3.53 7.5 10 19.5 26 625 1125 938 1688 2500 4500 — — 2.72 4.23 3 1 2 3.98 4.09 11.25 15 24 32 563 1000 844 1500 2250 4000 — — 3.20 4.72 4 1 2 4.92 5.03 15 20 30 40 363 625 544 938 1450 2500 — — 3.79 5.48 6 1 2 7.12 7.26 22.5 30 45 60 275 413 413 619 1100 1650 — — 7.01 9.57 8 1 2 9.34 9.56 30 40 60 80 200 300 300 450 800 1200 — — 11.38 15.45 a. OmegaFlex hose and corresponding braid must be used in combination to achieve pressure ratings. b. Hose sizes 3/8" through 2" meet ISO 10380 cycle life requirements of 50,000 minimum average cycles at maximum rated working pressure listed above. c. Assemblies in sizes 2-1/2" through 8" must incorporate pullover braid with neck down design to meet listed pressure ratings. Contact OmegaFlex for details on this procedure. d. Braid sleeve must be crimped to the listed braid sleeve crimp O.D. on sizes 2" and below in order to meet pressure ratings. Consult OmegaFlex for details. e. 1/4" meets ISO 10380 cycle life requirements at ISO specified pressure. TOP Specifying Part Numbers for Series 800 Products