OmegaFlex Stainless Annular Hose

---

Series 300 ISO 10380 Qualified Table of Specifications Hose-On-Reel Specifying Part Numbers for Series 300 and Series 300BASP Products Available in 304, 321,316L stainless steel and other materials on request Pressure capability includes full vacuum to pressures shown below Temperature rating from cryogenic to 1500F Consult Temperature Correction Factors for concurrent high temperature/high pressure applications Meets or exceeds ISO 10380 at maximum working pressure Hose corrugation designs include Standard Pitch, Open Pitch and Superflex. ( Contact OmegaFlex for specifications on Open Pitch and Superflex) Shipped in mill lengths or Braided Hose-On-Reel for easy fabrication   Series 300 Hose — Annular, Stainless Steel, Standard Pitch Hose  Nominal Hose Size (in.)  Braid Layersa  Nominal Outside Diameter Minimum Centerline Bend Radius (in.) Pressure Ratings at 70F (PSIG)b  Weight Per Foot (lb.)  Typical Mill Length (ft.)c Static Dynamic Max. Working Max. Test Nominal Burst 1/4d 0 1 2 0.46 0.51 0.56 4 6 140 2375 3125 210 3563 4688 — 9500 12500 0.09 0.18 0.27 30–100 3/8 0 1 2 0.61 0.67 0.73 2 4 100 1650 2200 150 2475 3300 — 6600 8800 0.12 0.23 0.35 30–100 1/2 0 1 2 0.76 0.81 0.87 3 5 75 1100 1625 113 1650 2438 — 4400 6500 0.16 0.26 0.37 30–100 3/4 0 1 2 1.05 1.10 1.16 4 6 50 800 1250 75 1200 1875 — 3200 5000 0.26 0.43 0.62 30–100 1 0 1 2 1.34 1.42 1.50 4.5 7 50 750 1000 75 1125 1500 — 3000 4000 0.36 0.62 0.91 30–100 1-1/4 0 1 2 1.64 1.72 1.80 4 11 25 725 1100 37.5 1088 1650 — 2900 4400 0.45 0.82 1.23 30–60 1-1/2 0 1 2 1.88 1.95 2.02 4.5 12 20 565 887 30 850 1330 — 2260 3550 0.48 0.82 1.23 30–60 2 0 1 2 2.48 2.58 2.69 5 13 16 500 750 24 750 1050 — 2000 3000 0.70 1.38 2.14 30–60 2-1/2 0 1 2 3.33 3.45 3.57 5 13 12 400 600 18 600 900 — 1600 2400 1.28 2.09 2.98 7–20 3 0 1 2 3.89 4.01 4.13 7.5 16 8 288 431 12 431 647 — 1150 1725 1.53 2.39 3.35 7–20 3-1/2 0 1 2 4.36 4.45 4.53 8 17 7.5 285 400 11 428 600 — 1140 1600 1.65 2.80 4.08 7–20 4 0 1 2 4.83 5.03 5.23 10 20 5 250 375 7.5 375 563 — 1000 1500 1.95 3.14 4.46 7–20 5 0 1 1 A 2 2 A 1 BB 1 BB-A 5.94 6.10 6.08 6.14 6.10 6.22 6.18 12 24 3.5 200 200 245 245 245 245 5.3 300 300 367 367 367 367 — 800 800 980 980 980 980 2.76 4.08 3.99 5.53 5.34 5.07 5.05 7–20 6 0 1 1 A 2 2 A 1 BB 1 BB-A 6.95 7.15 7.13 7.35 7.27 7.20 7.18 15 30 3 175 175 225 225 275 250 4.5 263 263 338 338 413 375 — 700 700 900 900 1100 1000 3.34 4.79 4.76 6.39 6.35 6.04 5.99 7–20 8 0 1 BB 1 BB-A 9.08 9.44 9.40 20 40 2.7 212 175 4.1 318 262 — 850 700 5.32 7.66 7.47 5–12.5 10 0 1 BB 1 BB-A 11.10 11.49 11.44 25 50 2.2 175 185 3.3 263 277 — 700 740 8.71 12.65 13.65 5–10 12 0 1 BB 1 BB-A 13.22 13.51 13.47 30 60 1.8 160 170 2.7 240 255 — 640 680 11.58 17.53 18.60 5–10 14 0 1 BB 16.46 16.71 35 70 1.7 110 2.6 165 — 440 14.57 23.05 5–10 a. Standard braid constructions are shown without a type designation. The “A” designation is an optional braid design for alternate pressure capability. See Series 300 Hose for Stainless Tubular Braid and Series 300 Abrasion Resistant Tubular Braid for detailed braid specifications. The “BB” designation indicates braided braid. b. OmegaFlex hose and corresponding braid must be used in combination to achieve pressure ratings. c. Consult factory for longer lengths. d. 1/4" meets ISO 10380 cycle life requirements at ISO specified pressure.   Hose-On-Reel Braided Hose-On-Reel is segmented into a continuous length to reduce scrap Convenient handling, storage and inventory control Reduced shelf space Also available in double braided construction Series 300BASP Braided Annular Hose-On-Reel, Single Braida Nominal Hose Size (in.) Reel Quantity (ft.) Reel Flange (in.) Reel Width (in.) Weight Per Reel (lb.) 1/4 400 24 13 74 3/8 400 24 13 102 1/2 400 24 13 112 3/4 300 28 15 128 1 200 28 15 178 1-1/4 300 45 19 263 1-1/2 300 45 19 s300 2 180 45 19 280 a. Use chart above for single braided hose specifications.   Specifying Part Numbers for Series 300 and Series 300BASP Products