Kidde Imperial Fire Hose

---

Imperial, part of the Kidde Fire Fighting organization, is a quality brand of woven jacket and rubber fire and industrial hose and hose products. Products manufactured from high quality raw materials to exacting standards make Imperial hose a durable and reliable performer, offering a complete range of products for general purpose use, industrial, municipal and forestry fire fighting.   Imperial 40D8 Nylon Double Jacket Rubber Lined Fire Hose   Imperial 40D8 is constructed of high strength, low stretch entangled filament polyamide/Cordura fibers over a rubber, ozone proof, E.P.D.M. tube. Imperial 40D8 is available with our innovative PERM-I-DENT II abrasion resistant coating. The standard colors are red, yellow, orange, blue, green and tan.   * Weight is uncoupled Imperial Paclite Nylon Double Jacket Urethane Lined Fire Hose   Imperial Paclite utilizes high strength, low stretch entangled filament polyamide/cordura fibers to produce a highly abrasion-resistant lightweight hose. The high-tech thermoplastic lining also contributes to reducing the overall weight of the hose. Imperial Paclite's lining has a tensile strength of over 5000 psi (35,000 kPa). Imperial Paclite Hose is available with our innovative PERM-I-DENT II abrasion resistant coating. The standard colors are red, yellow, orange, blue, green and tan.   * Weight is uncoupled Imperial 70D8 Polyester Double Jacket Rubber Lined Fire Hose   Imperial 70D8 is the ultimate in quality, municipal grade fire hose. This durable, double jacket hose is constructed of 100% high tensile strength polyester yarns, both warp and filler, and lined with a high-tech E.P.D.M. tube. Its engineered design guarantees minimum weight with maximum durability and flexibility. The standard color for Imperial 70D8 Hose is white. Other colors available with our innovative PERM-I-DENT II abrasion resistant coatings are red, yellow, orange, blue, green and tan.   * Weight is uncoupled Imperial Polylite Polyester Double Jacket Urethane Lined Fire Hose   Imperial Polylite is a lightweight hose that utilizes a thin, high tensile thermoplastic lining to minimize weight. Both the inner and outer jackets are constructed of polyester warp yarns and filament polyester filler yarns. Imperial Polylite's lining meets the NSF (National Sanitation Foundation) Standard 61 for potable water and has a tensile strength of over 5000 psi (35,000 kPa). Imperial Polylite is U.L. Listed. The standard color for Imperial Polylite Hose is white. Other colors available with our innovative PERM-I-DENT II abrasion resistant coatings are red, yellow, orange, blue, green and tan.   * Weight is uncoupled Imperial Super Attack Lightweight Attack Hose   Imperial Super Attack is a lightweight nitrile rubber through-the-weave construction fire hose. Its synthetic jacket is completely protected and locked in by a rubber cover and lining for extra toughness and durability. A heavy rib construction makes this hose resistant to cuts, punctures, impact and abrasion. Imperial Super Attack is a 600 psi (4200 kPa) fire hose that withstands temperatures from 1200F to –37F, (649C to –38C). Its light-weight design is virtually non-kinking and ideal for municipal fire protection. The standard colors for Imperial Super Attack are yellow and red.   * Weight is uncoupled Imperial Superlite High Rise Fire Hose   Imperial Superlite is an ultra-lightweight, maneuverable, nitrile rubber hose designed specifically for fighting fires in high rise buildings. The lightweight through-the-weave construction is heat and puncture resistant, kink resistant and has low friction loss. The rubber cover prevents water from penetrating the reinforcement thus minimizing the weight of the hose when in service. The standard color for Imperial Superlite is blue. * Weight is uncoupled Imperial Superflow Large Diameter Supply Hose   Imperial Superflow is a tough large diameter hose with the ability to deliver more water at a lower cost. But it doesn't stop there. It is lightweight, compact and durable with a high resistance to oils, chemicals, ozone and heat. Its tough, high tensile cover and lining, permanently interlocked with the synthetic reinforcement, provide greater abrasion resistance while being snag-proof, kink resistant, and immune to mildew or rot. U.L. labeling is available on 4" (100 mm) and 5" (125 mm) only. The standard color for Imperial Superflow is yellow.  * Weight is uncoupled Imperial F187 Polyester Single Jacket Plastic Lined Forestry Hose   A lightweight polyester jacket, polyurethane lined forestry fire hose that meets the USDA-US Forest Service Specification 5100-187. The standard color for Imperial F187 is white. Other colors available are yellow.   * Weight is uncoupled Imperial 629 Rubber Covered Through-The-Weave Forestry   Nitrile rubber covered forestry hoses that require no washing or drying and are mildew resistant. A protective rubber covering resists burns and prevents damage of the textile reinforcement which may be caused by abrasion or hot embers. The standard color is high visibility yellow.   * Weight is uncoupled Quality you can count on   All Imperial woven jacket products are available with our new, unique, innovative abrasion resistant coating. PERM-I-DENT II completely encapsulates the fibers of our jacket, providing a long lasting, vibrant color shield against the rough treatment that fire hose is exposed to every day. PERM-I-DENT II displays extreme resistance to bacterial and mildew growth as well. When subjected to the Mil-H-24606B Taber Abrader test, PERM-I-DENT II surpassed the minimum requirement by 6 times compared to other hose manufacturers. This coating is available on Imperial 70D6, 70S6, 70S5, 70S3, 70D8, Polylite, 40D8, and Paclite hose products. PERM-I-DENT II is offered in six vibrant NFPA recommended colors; red, yellow, orange, blue, green and tan.   Imperial Hose Couplings       Imperial recommends annual hydrostatic service testing of all hoses in accordance with NFPA 1962 guidelines.