Intralox Series 400

Flush Grid Exceptionally strong belt with a smooth surface. 17% open area. SLIDELOX™ rod retention feature, with even flush edges available in certain widths.	Raised Rib Exceptionally strong belt with a ribbed surface. Design has 26% open area. SLIDELOX™ rod retention feature with fully flush edges.	Flat Top A strong, versatile belt with completely closed top surface. Snap-in rods and fully flush edges.
Open Hinge Exposed hinge rod allows USDA acceptance for meat and poultry. Large open area of 30%. Rods are headed on both ends.	Non Skid Heavy-duty Flat Top belt with diamond pattern non-slip surface is designed for moving platform applications. Yellow acetal edge modules provide added safety by making it easy to distinguish moving belt from the stationary floor.	Roller Top Allows for low back pressure accumulation. Roller axle pins are stainless steel for durability and long-lasting performance. Design has 18% open area. SLIDELOX™ rod retention feature with fully flush edges.
	Transverse Roller Top Designed for 90 degree transfers. Roller axle pins are stainless steel for durability and long-lasting performance. Design has 18% open area. SLIDELOX™ rod retention feature with fully flush edges.

Accessories
	Molded and Split Sprockets Molded (one piece) and split sprockets are available for Series 400 belts in the following nom. pitch diameters: 6 tooth, 4" (102 mm); 8T, 5.2" (132 mm); 10T, 6.4" (163 mm), shown; 12T, 7.8" (198 mm); and 16T, 10.1" (257 mm).		Glass Handling Finger Transfer Plates Short fingers sturdy enough for even the harshest broken glass applications. These fingers are designed to resist breaking, but if confronted with deeply embedded glass, the individual fingers will yield and break off, preventing costly belt or frame damage.
	Flights Flush Grid and Open Hinge Streamline/ No-Cling Flights are available in 1'' (25 mm), 2'' (51 mm) and 3'' (76 mm) heights, and Flat Top Streamline Flights are available in 4'' (102 mm) and 6'' (152 mm) heights.		Two-Material Extended Back Dead Plate Allows easy retrofit from Series 400 Raised Rib belt to Series 1200 Flush Grid belt for pasteurizers and warmers. Grooves on top surface reduce product friction. Special glass handling features prevent broken glass from traveling under plate and tabs.
	Sideguards Sideguards, used with Flush Grid, Open Hinge and Flat Top belts, assure product containment and are available in 2’' (51 mm), 3'’ (76 mm) and 4'' (102 mm) heights.They are an integral part of the belt and are fastened by the hinge rods.		Hold Down Guide Available on Series 400 Non Skid and Flat Top belts. The tabs keep the belt down against the conveyor frame as it moves through the entrance of inclines and exit of declines.
	Two-Material Finger Transfer Plates Plates provide high strength fingers combined with a low friction back plate. Available in standard, standard extended back plate and glass handling which is sturdy enough for even the harshest broken glass applications.