Intralox Series 1400

Flat Top Robust design offers excellent belt durability, especially in tough glass applications. Smooth, flat top provides excellent lateral movement of containers and is ideal for container handling. SLIDELOX™ headless rod retention system allows re-use of rods	Mold To Width Flat Top Available in industry standard widths: 3.25'' (82.5 mm), 4.5'' (114.3 mm), 6'' (152 mm) and 7.5'' (190.5 mm). Also available in 85 mm widths for international markets. Optional tracking tabs fit into standard, single-barreled chain wearstrip. Call Intralox for specific belt strengths.	Flush Grid Thick 0.5'' (12.8 mm) belt thickness is ideal for long, wide applications carrying heavy loads. 1.0'' (25.4 mm) pitch facilitates tight transfers. SLIDELOX™ headless rod retention system allows re-use of rods.
ONEPIECE™ Live Transfer Flat Top Facilitates smooth, self-clearing, right angle transfers onto takeaway belts. Available in 6'' (152 mm) and 9.3'' (236.2 mm) widths. Molded, robust tracking tabs help support belt in heavy, side-loading applications. Call Intralox for specific belt strengths.	Flat Friction Top Heavy-duty, with thicker rubber deck and two wear-resistant grades of rubber. Continuous 2'' (50.8 mm) indent of rubber deck edge insures maximum rubber-to-product contact area. Nominal 1'' (25.4 mm) pitch allows high speed inclines/declines.	Roller Top Allows low back pressure accumulation for gentle product handling. Belt has 144 rollers per square foot providing greater product-to-roller contact. Stainless steel roller axle pins for durability. SLIDELOX™ Rod Retention System.

Accessories
	Sprockets Plastic, split sprockets are available in the following nom. pitch diameters: 16 tooth, 5.1" (130 mm), 18 tooth, 5.7" (145 mm), 21T, 6.7" (170 mm), shown, and a 31 tooth, 9.9" (250 mm). Intralox can machine sprockets with different numbers of teeth if the application cannot use standard sizes.
	Series NEW 3.9'' Pitch Diameter Square Bore Sprocket Allows easy retrofit from Series 900 Friction Top belt to Series 1400 Friction Top belt. No conveyor modifications needed to accommodate sprockets. Available in Acetal; 1.5'' and 40 mm square bore sizes.