| Clinched Std Duty |
| Clinched Heavy Duty |
| Welded Std Duty |
| Welded Heavy Duty |
| Key-Turn Heavy Duty |
| Sprockets |
| Flights & Attachments |
| Up | About Belt Power | Products and Services | Contact Us | Request a Quote |
Keystone Clinched Heavy Duty
Heavy duty clinched selvage belts are available in two different mesh sizes and four different materials: low carbon galvanized steel, C-1045 bright high carbon steel, T-304 stainless steel and T-316L stainless steel. Clinched selvage belts can be ordered in any width from 10" to 192". These belts feature a better wearing edge surface than welded selvage for misaligned conveyor systems and they mechanically prevent the belt from narrowing under heavy loads. Additionally, heavy duty clinched selvage belts are just as flexible as those with welded selvage.
Sprockets driving heavy duty clinched selvage belts CANNOT be placed on the first drive opening on either side of the belt.
CLINCHED SELVAGE BELT SPECIFICATIONS DESIGN MESH MIN. WIDTH MAX. WIDTH MAX. TENSION*
(lbs./ft. of width)APPROX. WGT.
(lbs./sq. ft.)H4 1" x 1" 10" 192" 1350 3.55 H5 1/2" x 1" 10" 192" 1750 3.95
* Maximum working tension per foot of belt width given for drum driven applications only.All heavy duty belts have the following dimensions:
Flat strip = 1/2" wide x .062" thick round edge
Connector rod = 6 gauge (.192" diameter) - high tensile strength