Brecoflex  Products 

---

BRECOflex timing belts are constructed from an extremely wear resistant polyurethane (standard 92 Shore A, optional 85 Shore A) and high tensile braided steel tension members. For special applications, Kevlar tension members are available. These high grade materials combined with our sophisticated manufacturing know-how is the basis for the extreme accuracy and reliability of BRECOflex timing belts. Our various timing belts, including accessories like matching pulleys, clamps, tensioners and slider beds meet today’s high industrial standards. BELT VERSIONS AVAILABLE BRECO M - Open Ended Belts Open ended roll stock for linear drive applications, available in any length and up to 150mm wide (wider versions upon request). BRECO V - Endless Belts Welded Spliced and welded endless belts, for conveying and positioning applications, available in any length and up to 150mm wide (wider versions upon request). BRECOFLEX - Truly Endless Belts - Continuous Helically Wound Tension Member Truly endless belts with uninterrupted steel cord tension member for power drives, up to 70 feet in length without set-up and tooling charges (longer versions to specification). Belt length can be specified in one tooth increments. PROFILES - Available with all BRECOflex belt versions Profiles are welded-on belt back for material and conveying applications where synchronous placement is a must. Approximately 3,000 stock profiles are available to configure belts to specific needs.

---

	TIMING BELTS Belts with steel cable or Kevlar tension members Metric and inch size pitches Available open ended, joined and truly endless Used for linear drive, conveying, positioning and power transmission Dimensionally stable No post elongation
	PROFILED TIMING BELTS Molded and machined profiles Approximately 3,000 stock profiles available Custom profiles offered Machined profiled belt backs
	FLAT BELTS For conveying and power drive applications Covers: Urethane, rubber, linatex, neoprene, silicone, NBR Carcass: Urethane, polyester, Kevlar, cotton, neoprene, Nomex, NBR Special designs and material compositions available
	PULLEYS Metric and inch pitch pulleys Aluminum stock pulleys Custom pulleys also available Aluminum, steel, stainless steel, delrin, nylon
	SLIDER BEDS FLAT AND GUIDED Constructed of abrasion resistant UHMW Provide support for timing belt CLAMPS FOR OPEN ENDED BELTS Available with and without mounting holes Recommended for linear drive applications
	BELT TENSIONERS Recommended for linear drives where adjustment of pretension is required Tensioner Type B with eccentric adjustment for belt drive applications
	SMOOTH TOOTH ENGAGEMENT This unique circular "arc" tooth meshing enables the transmission of force dynamically during the point of engagement of belt and pulley. While the radial point of tooth engagement is constantly shifting and the "arc" shaped timing belt tooth passes the pulley centerline, the succeeding tooth is already engaged and avoids tooth snapping into the pulley tooth gap. This results in smooth self-tracking intermeshing and leads to optimal drive characteristics by reducing the polygonal surface of belt and pulley. This also leads to reduced vibration and less noise which is of high importance in today's high demanding design criteria.